How To Change Ink Roller On Monarch 1131
ULINE H-7894 Monarch 1131 Date/Numeric One Line Characterization Gun Instructions
INSTRUCTIONS
CHANGING THE INK ROLLER
- Pull the latches back and swing the cover open completely. Y'all should hear a click
NOTE: Exercise not force the cover by the click position. - Concur the labeler sideways over a trash can while pushing the push to release the ink roller. (See Figure 1)
- Hold the new ink roller by the stalk. (See Figure 2)
- Slide it onto the post, snapping it into place. (See Figure 2)
- Shut the cover completely
SETTING PRINT CHARACTERS
- Pull the knob until the indicators are on the desired band.
- Turn the knob until the desired graphic symbol appears black on a white background between the indicators. To print a blank, select the bare infinite for that ring. (See Figure 3)
- Repeat steps 1-2 for each band.
- Push in the knob when you are washed.
LOADING LABELS
- Pull the latches back and swing the cover open completely. You should hear a click. (See Figure 4)
Note: Do not force the comprehend past the click position. - For loading a new curlicue of labels, tear off and discard the showtime x inches of label and liner.
- To prevent jamming, peel the first 12 labels from liner and discard.
INSTRUCTIONS CONTINUED
LOADING LABELS Connected
- Place the label roll betwixt the hubs and click into identify. (Come across Effigy 5)
Note: Practice not thread characterization strip through whatever rollers. - Drape the supply across the labeler and center it over the peel bar. The supply should hang out five-half-dozen inches by the peel bar.
- Close the cover.
- Squeeze and hold the trigger while feeding the label strip under the roller and into the big slot above the arrow until it stops/hits the dorsum. (Come across Figure half dozen)
- Hold the strip in identify and squeeze the trigger 8 times or until the characterization strip feeds through the rear get out.
- Remove whatsoever loose labels.
Immigration LABEL JAMS, CLEANING AND LUBRICATION
- Open the cover and remove the label curl.
- Remove any loose labels from the inside of the labeler. (See Effigy vii)
- Pull upwardly on the supply guide to betrayal the backing newspaper path and remove loose labels. (See Figure 8)
- Snap the supply guide back into place.
- Use a commercial adhesive solvent to clean adhesive buildup.
- Remove the ink roller to expose the print bands and brush them off with a toothbrush.
- Reload, then close the cover.
ane-800-295-5510
Web: uline.com
Documents / Resource
Source: https://manuals.plus/uline/h-7894-monarch-1131-datenumeric-one-line-label-gun-manual-pdf
Posted by: litchfordsagems66.blogspot.com
0 Response to "How To Change Ink Roller On Monarch 1131"
Post a Comment